热门搜索:

深圳市新胜科电子仪器科技有限公司主要经营:音频分析仪,网络分析仪,频谱测试仪,电子负载,电声测试仪,示波器,EMC电磁兼容测,调制分析仪,LCR测量仪,数字电桥,三相标准源,音频扫频仪,时钟检测仪,信号发生器,电子表,万用表,功率计,喇叭测试仪,综合测试仪等;深圳市新胜科电子仪器科技有限公司希望能与您成为合作伙伴

    产品分类
    电话:13510100387
    联系人:曾广科先生
    手机:13510100387
    邮编:
    地址:广东省 深圳市 龙岗区龙城街道军田路22号锦中业大厦B1207

    Audio Precision SWR2755F SWR2755M音频开关盒

    更新时间:2024-05-28   浏览数:119
    所属行业:仪器仪表 电子测量仪器 视频/音频分析仪
    发货地址:广东省深圳市  
    产品数量:0.00台

    起订量:1      价格:1 - 9999


    工作时间24小时 报价方式面议实物为主 付款方式皆可 所在地深圳 业务范围全国 可售卖地全国
    AP | SWR-2755 音频测试开关|AudioPrecision|音频开关
    厂商名称: AP |AudioPrecision


    Audio Precision offers three models of the SWR-2755 audio switchers, which expand the 2-channel input and output capabilities of Audio Precision 2700 series and ATS-2 audio analyzers, as well as older System One and System Two instruments.

    SWR-2755 switchers replace the current SWR-2122 switchers, which have been discontinued. The new switchers are entirely compatible with our current products and offer better performance at a lower price.
    Built with the same feature set and solid integrity of the SWR-2122, the new SWR-2722 series bring significantly lower crosstalk (18 dB better in an unbalanced 600 Ω load; 10 dB better in a balanced 600 Ω load), a new universal power supply that automatically adjusts to all line voltages, a convenient rear-panel ground lug and full EMC and safety regulatory compliance. Manufacturing economies enable us to offer the new switchers at a significantly lower price.


    Key features

    * Input and output configurations enable switching of generator outputs or analyzer inputs, or both. 
    * Balanced and unbalanced configurations are available. 
    * Multiple switchers can be connected to an Audio Precision analyzer, expanding the system capability to as many as 192 inputs and outputs. 
    * Low inter-channel crosstalk, less than –150 dB at 20 kHz in the balanced configurations. 
    * All switchers are one rack unit (RU) high (1.75"). switchers can be used on the bench or rack mounted with an optional rack mount adapter kit.

    Specs 

    Electrical Characteristics 

    * Max Voltage Rating 200 Vpk, 160 Vrms 
    * Max Signal Power 5 W or 200 mA

    * Crosstalk 
    Balanced 600 ohm load 
    –150 dB @ 20 kHz
    –136 dB @ 100 kHz 
    Unbalanced 600 ohm load
    –138 dB @ 20 kHz
    –124 dB @ 100 kHz

    * Series resistance typically <0.3 ohm per side 
    * Shunt capacitance typically <90 pF, from signal path to chassis (100 nF from BNC shell to chassis on U versions). 
    * Reverse termination 604 ohm, 250 mW maximum 




    General Characteristics

    * Power Requirements 90–250 Vac, 50-60 Hz, via external dc supply module

    * Temperature Range 
    Operating 0°C to +50°C 
    Storage –40°C to +75°C

    * Humidity 80% RH to +40°C, (non-condensing) 
    * Dimensions 16.5 x 1.75 x 10.5 inches [41.9 x 4.4 x 26.7 cm] 
    * Weight Approximately 9.9 Ibs [4.5 kg]

    Regulatory Compliance 
    * EMC complies with FCC Part 15 Subpart J (class B), 89/336/EEC, 92/31/EEC, and 93/68/EEC, EN 50081-1 (1992) Emissions Class B, EN-50082-1 (1992) Immunity. 
    * Safety complies with 73/23/EEC, 93/68/EEC, EN6010-1 (1903)— IEC 1010-1 (1990) + Amendment 1 (1992) + Amendment 2 (1995).
    Installation category II—Pollution Degree 2. 
    * External Power Supply AP part number 4540.0020 complies with IEC 60950:1991+A1+A2+A3+A4, UL 950 Third Edition E183744, CSA C22.2 No. 950.
    * External Power Supply AP part number 4540.0051 complies with IEC 60950:1991, UL60950 Third Edition E199447, CSA C22.2 No. 60950, PSE J60950:1998, NOM-001-SCFI-1993. 

    http://www.szxskyq.com